Laser sound and LED flash using 555 timer IC – Breadboard tutorial

Laser sound and LED flash using 555 timer IC – Breadboard tutorial
Featured

Laser sound and LED flash using 555 timer IC – Breadboard tutorial

Introduction:

In this tutorial we are going to make a breadboard circuit using 555 timer IC that will make a laser sound along with the flashing of led at the rate of 5Hz. We are going to make the circuit step by step. Each step will be explained in detailed along with the video of the whole process.

For India

You can buy whole kit from here - Electronics Kit DIY Components
(You can get some components from the market, but I will recommend you to have the above kit as has all basic necessary items for begineers)
Mini Breadboard - 1
9V battery - 1
Wire Stripper - 1
Battery Snapper - 1
Nose Plier - 1
555 timer IC - 1
220K Resistor - 1
470Ohm Resistor - 1
10uf Capacitor - 2
100n capacitor - 1
Speaker - 1

For USA

You can buy all in one 555 timer kit from here - Electronics Kit DIY Components
(Some items may not be present in the above kit, but still I will recommend it buying since we will be doing a lots of 555 timer IC projects in upcoming tutorials. You will need a kit like this to learn.)
Mini Breadboard - 1
9V battery - 1
Wire Stripper - 1
Battery Snapper - 1
Nose Plier - 1
555 timer IC - 1
220K Resistor - 1
470Ohm Resistor - 1
10uf Capacitor - 2
100n capacitor - 1
Speaker - 1

(Note : You can check my previous tutorials on 555 here)

Click on the below chapter to start off with the tutorial.

, , , , , , , , , , , , , , , , , , ,